How to Grow and Care for Buttonbush

Buttonbush (Cephalanthus occidentalis) is a hardy deciduous shrub used for beauty and functionality. Buttonbush is a fast grower characterized by its round, white, spiky flowers and fragrant aroma. Buttonbush grows best in wetlands or near rivers and is often used to prevent erosion. The shrub requires full sun but may tolerate some shade. Otherwise, buttonbush is extremely resilient in all types of temperatures and conditions. It is important to note that the leaves of this plant are toxic to humans.

Buttonbush Care

Here are the main care requirements for growing buttonbush:

• Plant in full or partial sun though the shrub will thrive in six to eight hours of sun a day.
• Aim to keep the soil moist at all times, especially if the bush is in full sun.
• Avoid alkaline soil and plant buttonbush in soil that is neutral to slightly acidic with a soil pH level of 6.8 to 7.2.
  
• Feed the bush in the spring with a slow-release fertilizer.

Light

Buttonbush prefers partial to full sunshine. It often grows better in full sun exposure but it can be a delicate balance. Shrubs planted where the sun readily dries out the soil will struggle to thrive.

Soil

Buttonbush is perfect for low-lying, wet areas where other plants may not grow well. It adapts to various soil conditions even though it is most often found in alluvial areas with sand and silt. Buttonbush prefers a neutral to slightly acidic soil with a soil pH level of 6.8 to 7.2 and does not perform as well in alkaline soil.

Water

These plants prefer wet conditions and do not tolerate drought. They can even grow in flooded areas. When located in an ideal spot, watering may not be required. However, if they are placed in an area where conditions may dry up, they will need regular watering.

Temperature and Humidity

The hardy nature of buttonbush shrubs contributes to their success in USDA hardiness zones 5 to 11. They are heat-resistant, cold-resistant, and extremely resilient when faced with overly wet conditions. This makes them great for a wide range of climates. They look their best in temperatures ranging from 61 to 75 degrees F. and are tolerant of high levels of humidity as long as there is plenty of water available. Dry, arid conditions are not suitable for growing buttonbush.

Fertilizer

Buttonbush does best in nutrient-rich soil and will benefit from yearly fertilizing. Add a slow-release fertilizer in the spring to encourage new growth and summer flowering. For new shrubs, it is best to wait until the following year to fertilize, as this gives them enough time to properly establish.

Types of Buttonbush

• ‘Bailoptics': This cultivator is a small variety, only reaching about 6 feet high and 6 feet wide, making it great for smaller spaces.
• ‘Bieberich’: This variety reaches up to 12 to 15 feet high with a similar spread. It displays unique pale pink or pinkish-white blooms rather than the usual white flowers. Its leaves also turn a bronze color in the fall.
• 'Sugar Shack': This densely foliaged dwarf variety only reaches up to 4 feet high and 4 feet wide. Each spring and fall, its leaves take on a reddish tone.

Pruning

Because of its size, many people prefer to keep buttonbush pruned. When left to grow untrimmed, the shrub takes on an irregular shape. Wayward or scraggly branches can be trimmed away for a more manicured look. Alternatively, these shrubs can be limbed-up, which refers to removing lower branches to establish a more tree-like shape.

If it becomes unmanageable, simply cut the shrub down to the ground in early spring. Because it is such a fast grower, it will produce new growth very quickly.

Propagating Buttonbush

Buttonbush can easily be propagated through stem cuttings. It is best done in the spring when new growth appears. You will need a small pot, moist soil, rooting hormone, and a sharp knife. Then follow these instructions:

1. Select a stem that is around 4 to 6 inches long. It should have a node and some leaves on it.
2. Using a sharp, clean knife, cut the stem below a node.
3. Remove any lower leaves, keeping only the upper leaves.
4. Dip the cut end into rooting hormone and shake off any excess.
5. Fill the small pot with moist soil and poke a hole into the soil with your finger.
6. Slide the cutting into the hole and firmly press the soil around the cutting.
7. Place the cutting in an area with bright, indirect lighting and keep the soil moist.
8. Roots should develop in a couple of weeks. Once roots form and new growth appears, you can transplant the cutting to its permanent location.

How to Grow Buttonbush From Seed

Starting buttonbush from seed is simple. The seeds do not require stratification and can therefore be planted directly into the ground or in small starter pots. You will need moist soil and small pots. Then follow these instructions:

1. Collect ripe seeds in the fall or use a purchased packet of seeds.
2. Plant the seeds in moist soil, making sure to remove any weeds and trim back any plants that could compete with the buttonbush’s growth. Alternatively, you can start seeds in small pots.
3. Keep small pots in a sheltered greenhouse or covered area, as these are more susceptible to cold.
4. Seedlings should appear in the spring once temperatures are warm enough.
5. Keep the soil moist. If the seeds were started in pots, continue to repot the seedlings into larger pots.
6. Once the potted seedlings are at least a year old, transfer them to the garden, spaced about 3 feet apart.

Potting and Repotting Buttonbush

Buttonbush’s large size makes it a bit tricky to keep in pots. However, young, small shrubs or dwarf varieties can be kept in large pots. If you choose to keep a buttonbush in a pot, select container material that helps the soil stay moist, such as plastic or coated ceramic. Steer away from terra-cotta, as this material wicks away moisture and dries the soil. Despite its adaptation to extremely wet soils, the pot should have drainage holes. If you choose a standard potting mix, adding a handful or two of perlite or sand will help to mimic the plant's native soil conditions.

Once the shrub fills the container, tip it on its side to gently slide the shrub out. Plant into a larger container or the ground in moist soil. Keep in mind that potted buttonbush plants will need consistent watering since they do not have access to underground water sources.

Overwintering

Because these shrubs can handle temperatures that dip below 0 degrees Fahrenheit. they don't need much extra care to survive cold winters. Potted shrubs should be moved to a protected area. For shrubs in the garden, simply apply mulch around the plant to help insulate the roots and retain moisture.

Common Pests and Plant Diseases

Besides the occasional deer foraging on buttonbush, you can expect pests such as lygus bugs (insecticides will kill nymphs), a few leafhoppers, and thrips. These pests can cause misshapen, stunted, or yellowed leaves. Remove problematic leaves for minor infestations. Use other controls, such asinsecticidal soap for heavier infestations.

This shrub does not attract diseases, though you may have a case of brown leaf spot. The spots look like little spores that may enlarge into blotches. This typical fungal infection does not require treatment other than removing infected leaves, cleaning up around the base of the shrub to prevent spread, and pruning to allow more sunlight and airflow into the plant.

How to Get Buttonbush to Bloom

Bloom Months

Buttonbush flowers appear in late summer, generally June through August.

How Long Does Buttonbush Bloom?

Though these flowers only last around three to four days, they offer plenty of visual interest. After the flowers fade, they produce small, brown, button-like seed balls that last through the winter as a source of food for all types of birds, including waterfowl, ducks, and shore birds.

What Do Buttonbush Flowers Look and Smell Like?

Buttonbush is known for its unique, perfectly spherical white spiky flowers. Each floral sphere measures around 1- to 1½-inch diameter and is packed with dense, tubular flowers. The flowers emit a bit of a honey fragrance. The smell of buttonbush blooms entices pollinators.

How to Encourage More Blooms

To encourage flowering, be sure to plant the buttonbush in an area that receives full sun. Give a slow-release fertilizer in the spring to encourage summer blooming.

Common Problems With Buttonbush

Buttonbush is known for its extremely easy care requirements and its hardy nature, meaning there aren’t many problems growing these plants. The biggest problem is too little water.

Leaves Falling Off or Wilting

Leaf loss or wilting is a sign of drought. Because these shrubs grow near sources of water or in very wet soils, too little water can be a big problem. Be sure to increase the amount of water the plant receives. Alternatively, you may want to relocate the plant to an area that receives consistently more water, such as next to a pond or river.

From: thespruce