How to Grow and Care for Bluebeard (Blue Mist)

Whether you know it as bluebeard or blue mist, Caryopteris x clandonensis is one of the few plants that produce genuinely blue flowers. An accidental hybrid ofC. incanaandC. mongholica, ithas since been bred to produce several popular cultivars. The compact size and soft gray foliage make bluebeard plants a good choice in any size garden.

Depending on the climate, these plants are grown either as deciduous shrubs or woody perennials that die back to the ground each winter. Growing from neat low mounds, the narrow silvery-gray leaves resemble those of willow. Small, pale blue flowers cover the plant from midsummer into fall.

Bluebeard Care

Here are the main care requirements for growing a bluebeard plant:

• Time new plantings in the spring or fall, provided that your area doesn't get too cold.
• Grow bluebeard in full sun and with medium-moisture soil if you want them to thrive, though they tolerate both drought and shade.
• Plant in soil using compost or peat moss, and perhaps vermiculite, to improve drainage.
• Feed with organic matter instead of chemical fertilizers.
  

Light

Bluebeard should be planted in full sun areas for the best blooms. They will tolerate some shade, although flowering will be somewhat reduced. Bluebeard may bloom later in the season if it's planted in a shady location.

Soil

Bluebeard prefers a medium-moisture, well-draining soil, but does quite well in moderately arid conditions once it is well established; but it dislikes wet, poorly drained soils. Bluebeard thrives best with a neutral soil pH but will accept slightly acidic or slightly alkaline conditions.

Water

Bluebeard plants are drought-tolerant, but water them regularly when young. Once established, they don’t require any supplemental watering unless you are having a particularly dry season.

Temperature and Humidity

Bluebeard is reliably hardy in USDA zones 6b to 9a; however, in the northern part of the range (zone 6), it may die back to ground level in winter. This is not a problem because this is a fast-growing shrub that blooms on new growth from the current year.

Fertilizer

These plants are not heavy feeders, so some organic matter mixed into the planting hole should be all the food they need. Side dressing with compost is preferred over chemical fertilizers for bluebeard plants. Too much fertilizer makes for a leafy plant with fewer blooms.

Types of Bluebeard

There are several types of bluebeard commonly used in landscapes:

• Caryopteris x clandonensis: The original hybrid is one of the hardiest forms available and still one of the most popular.
• 'Dark Knight': This variety has the darkest blue flowers, but it is a bit more temperamental to grow.
• 'Sunshine Blue': This cultivar has deep blue flowers offset by yellow foliage.
• ‘Pink Chablis’: This Proven Winners introduction has pink flowers.
• ‘Longwood Blue’: This variety has sky-blue, fragrant blooms, silver-grey leaves, and a taller stature reaching about 4 feet high.
• ‘Worchester Gold’: This cultivar has golden foliage and lavender flowers.

Pruning

To keep the plant shaped and flowering, bluebeard plants should be cut down by at least half in the early spring. You can cut them back to 12 to 18 inches without harm. As the plant ages, you will get some dead wood in the center. Prune this out as needed.

If the plants die back in winter, as is common in zones 6 and 7, remove the dead stalks in spring as new growth is beginning.

Propagating Bluebeard Plants

Bluebeard may self-seed, and the volunteers can be transplanted as you wish. You can also propagate by softwood cuttings in late spring. Here's how to do it:

1. You will need sterilized pruners, rooting hormone, seedling pots, and an all-purpose potting mix.
2. Use sharp pruners to cut 6-inch segments off new-growth stems.
3. Remove the lower pairs of leaves and dip the ends of the cuttings in rooting hormone.
4. Plant the cutting in pots filled with ordinary general-purpose potting mix.
5. Keep the cuttings in bright indirect light and make sure they are well-watered until they have developed good root systems. At this point, they are ready to plant in the landscape.
6. When planting, the crown should be level with the soil surface or slightly higher in a hole lined with organic matter for food and vermiculite for drainage. Bluebeard is slow to leaf out in the spring, so don’t panic if yours looks like a dead twig. They typically grow quickly, between 18 and 30 inches annually.

How to Grow Bluebeard From Seed

Propagating these plants from seeds is not a common activity, since it's so easy to propagate them from stem cuttings. But if you want to try seed propagation, follow these steps:

1. Collect seeds from the seed pods in late fall, place them in a plastic bag filled with damp sphagnum moss, and chill them in a refrigerator for three months.
2. In late winter, sow the seeds 1/4-inch deep in pots filled with damp commercial potting mix.
3. Place the pots in a bright location at about 68 degrees Fahrenheit to germinate and sprout, and continue to grow them until planting time in spring.

If your growing season is long enough, your plants will probably bloom in their first growing season. Be aware that your new seedlings may look a little different from the mother plant, which is common when planting seeds from hybrid plants.

Potting and Repotting Bluebeard

With its compact growing habit and unique color, bluebeard works well in large pots. Plant in a pot with drainage holes that’s twice as wide as the rootball using a combination of high-quality potting mix, compost, and sand. Repot to refresh the growing medium once a year.

Overwintering

No particular winter protection is necessary with these plants. Clear away plant debris from around the base of the plants to prevent fungi and pest larvae from overwintering. Some gardeners like to do severe pruning in early winter rather than spring.

Container plants should be moved to a covered porch or unheated garage for the winter, orplaced inside an insulating silo.

Common Pests & Plant Diseases

Bluebeard can be bothered by the fourline plant bug. The foliage will get mottled, but it doesn’t harm the plant, and the bug moves on quickly enough. If the bugs disturb you, insecticidal soap, horticultural oil, or neem oil will control them.

The only disease of concern is crown rot, a fungal disease that sometimes occurs when bluebeard is planted in dense, wet soil.

How to Get Bluebeard to Bloom

Generally speaking, these plants bloom well provided they are getting enough sun. However, over-fertilizing can cause the plant to direct its energy into leaf production at the expense of flowers. If your plant is not blooming adequately, consider cutting back on whatever fertilizer or compost it is getting.

Bloom Months

Blue beard typically blooms in late summer to fall between the months of July through September.

What Do Bluebeard Flowers Look and Smell Like?

Bluebeard has an axillary cymes flower formation—starting at the end of the stems are clusters of fluffy, bright blue blooms, which look like mist or clouds of smoke. Although bluebeard is known for its blue flowers, there are also purple and pink hybrids. Bluebeard’s namesake comes from the base petals that look like a tuft of hair or beard. The nectar from these fragrant flowers attracts hummingbirds, bees, and butterflies. Birds feed on bluebeard when the flowers go to seed in the fall. Not only do the blooms have a light, sweet fragrance, but the leaves smell like eucalyptus.

How to Encourage More Blooms

Regular deadheading of the spent flower heads will help stimulate continued blooming.

Common Problems With Bluebeard

Bluebeard is a remarkably durable, easy-care plant, with just a couple of common issues.

Branches Die Back One by One

When the branches on your plant begin to die and turn brown, it is a likely sign of crown rot—a fungal disease that affects the plant at ground level. Close examination may show brown, brittle stem sections at ground level. By the time the disease is diagnosed, it may be too late to save the plant. Crown rot is usually a problem in overly wet, dense soils, so you can prevent it by making sure to amend the soil to improve its drainage before planting. Organic matter and a few handfuls of vermiculite blended into the planting hole are good amendments if your soil is too dense.

Volunteer Plants Cover the Garden

Bluebeard self-seeds itself very freely, meaning that you will be constantly plucking out volunteer seedlings. To minimize this, make sure to deadhead the spent flowers routinely, and at the end of the blooming season, trim off the stems below the flowering tips to remove any remaining seeds.

From: thespruce